New build – input/comments appreciated

[JAZZCNC]

MPG is nice but it's not required for general use and on a machine used mostly for wood ie: router then individual MPG's are wasted money to me. On lathe or Milling machien with lots of setting up etc then yes I'd probably consider them but not on wood router.! One is enough and then it's more of a luxury than needed.!

Same goes with servos for me with Small/Med router based machines like this. The price difference is 3 x that of Decent steppers. AM882 or Em806 Digital drives with 3-4Nm steppers will be less than £100 per axis and they easily push 60Kg around at 10,000mm/min or more with 10mm pitch screw which is plenty fast enough for any DIY machine.